RSC-485(TFT)   Keyboard Controller

Power supply: 12VDC-800mA

Connection Ch1: RS485+/A1,  RS485-/B1

Default: PELCO-D, 2400 Bps, Cam. ID-001

Change Cam. ID: CAMERA -"N"- ENTER

Change Protocol: F1-"61"-ON-(WIDE-TELE)-ENTER

Change Baud R.: F1-"62"-ON-(WIDE-TELE)-ENTER

Save Preset Position: PRESET -"N"- ENTER

Call Preset Position: Call -"N"- ENTER

First set camera ID address, Protocol and Baud Rate by DIP switch on camera!